Xerox P8EX Spire CXP8000 Color Server - User Guide - Page 251

Imposition Workflow 237 Creep Creep is a common problem in saddle-stitch jobs When signatures are inserted inside one another, the signatures inserted last are the farthest from the center of the booklet. As a result, the outer edges of the inner pages creep past the outer pages. Note: It is recommended that you use a border around all documents when you use creep. The Creep parameter uses the following terminology: • Creep in specifies the amount of movement towards the spine applied to the center two pages and their backs (in other words the pages that require the most amount of compensation). An ever-decreasing amount of movement is automatically applied from the center quartet of pages back towards the outside four pages of the job (in other words every quartet of pages is moved by an amount less than the previous quartet). Note: The outside two pages and their backs are not moved (the value 0.0 is used).