Schwinn 290 Recumbent Bike 2021 model Service Manual - Page 97

Right side, If you are replacing the Crank Ring Covers Crank Discs, continue, to step 8., If you are

Get Schwinn 290 Recumbent Bike 2021 model PDF manuals and user guides View all Schwinn 290 Recumbent Bike 2021 model manuals
Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

6. Using a #2 Phillips Screwdriver, remove 3 screws (c) that attach the Crank Disc to the Right Main Shroud. Set them safely aside for reassembly. Right side &UDQN disc c Main shroud 7. Using a #2 Phillips Screwdriver, remove the 4 screws (d) that secure the Right Shroud. Remove the bottom screws ¿UVWDQGWKHQWKHWRSVFUHZV Note: It is not necessary to remove the Crank Arm and d Crank Disc in order to remove the Shroud. Turn the Crank Arm to point up toward the rear of the bike. Carefully angle and remove the Right Main Shroud. Set the d parts safely aside for reassembly. NOTICE: Do not pinch or cut the cables. If you are replacing the Crank Ring Covers (Crank Discs), continue to step 8. If you are not replacing the Crank Discs, go to step 11. 97

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
97
6.
Using a #2 Phillips Screwdriver, remove 3 screws (c)
that attach the Crank Disc to the Right Main Shroud. Set
them safely aside for reassembly.
7.
Using a #2 Phillips Screwdriver, remove the 4 screws
(d) that secure the Right Shroud. Remove the bottom screws
¿UVW± DQG WKHQ WKH WRS VFUHZV³
Note:
It is not necessary to remove the Crank Arm and
Crank Disc in order to remove the Shroud. Turn
the Crank Arm to point up toward the rear of the
bike.
Carefully angle and remove the Right Main Shroud. Set the
parts safely aside for reassembly.
NOTICE:
Do not pinch or cut the cables.
c
&UDQN
disc
Main
shroud
Right side
d
d
If you are replacing the Crank Ring Covers (Crank Discs), continue
to step 8.
If you are not replacing the Crank Discs, go to step 11.