Schwinn 290 Recumbent Bike 2021 model Service Manual - Page 48

that attach the Crank Disc to the Right Main Shroud. Set

Get Schwinn 290 Recumbent Bike 2021 model PDF manuals and user guides View all Schwinn 290 Recumbent Bike 2021 model manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

4. Using a #2 Phillips Screwdriver, remove the 3 screws (c) that attach the Left Main Shroud to the Right Main Shroud. Set them safely aside for reassembly. Left side (Pedal not shown for clarity) c c 5. Using a #2 Phillips Screwdriver, remove 3 screws (d) that attach the Crank Disc to the Right Main Shroud. Set them safely aside for reassembly. Right side &UDQN disc d Main shroud 6. Using a #2 Phillips Screwdriver, remove the 4 screws (c) that secure the Right Main Shroud. Remove the bottom VFUHZV¿UVWDQGWKHQWKHWRSVFUHZV6HWWKHPVDIHO\DVLGH for reassembly. Note: It is not necessary to remove the Crank Arm, Crank Disc and Left Main Shroud in order to remove the Right Main Shroud. Turn the Crank Arm to point up toward the rear of the bike. c Carefully angle and remove the Right Main Shroud. NOTICE: Do not pinch or cut the cables. Be sure to avoid damaging the internal Shroud Insert. Set the parts safely aside for reassembly. 48 c No VFUHZ (this side) Internal shroud insert

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
48
Left side (Pedal not shown for clarity)
4.
Using a #2 Phillips Screwdriver, remove the 3
screws (c) that attach the Left Main Shroud to the Right
Main Shroud. Set them safely aside for reassembly.
c
c
5.
Using a #2 Phillips Screwdriver, remove 3 screws (d)
that attach the Crank Disc to the Right Main Shroud. Set
them safely aside for reassembly.
6.
Using a #2 Phillips Screwdriver, remove the 4 screws
(c) that secure the Right Main Shroud. Remove the bottom
VFUHZV ¿UVW± DQG WKHQ WKH WRS VFUHZV³ 6HW WKHP VDIHO\ DVLGH
for reassembly.
Note:
It is not necessary to remove the Crank Arm,
Crank Disc and Left Main Shroud in order to
remove the Right Main Shroud. Turn the Crank
Arm to point up toward the rear of the bike.
Carefully angle and remove the Right Main Shroud.
NOTICE:
Do not pinch or cut the cables. Be sure to avoid
damaging the internal Shroud Insert.
Set the parts safely aside for reassembly.
d
&UDQN
disc
Main
shroud
Right side
Internal
shroud
insert
c
c
No
VFUHZ
(this
side)