Schwinn 290 Recumbent Bike 2021 model Service Manual - Page 44

Connect the new Mast Data Cable to the Data Cable

Get Schwinn 290 Recumbent Bike 2021 model PDF manuals and user guides View all Schwinn 290 Recumbent Bike 2021 model manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

6. Re-install the rubber plug in the access opening in the Mast. Detach the old Data Cable and discard. 7. Connect the new Mast Data Cable to the Data Cable from the Main Frame. The Frame cable connector (indicated) is attached to the plastic insert in the mast mount. Leave the plastic insert and Frame cable connector in place and carefully connect the Console Mast cable. Align the clips on the cable connectors and make sure the connectors lock. NOTICE: Do not cut or pinch the cables. This step may require two people. Frame cable connector X3 6mm 8. Using a 6mm hex wrench, install the Console Mast to the Main Assembly. Align the curved washers so the surface is flush with the Console Mast tube. NOTICE: Make sure the Console Cable does not fall into the Console Mast. Do not cut or pinch the Console Cable. 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
44
6.
Re-install the rubber plug in the access opening in the
Mast. Detach the old Data Cable and discard.
7.
Connect the new Mast Data Cable to the Data Cable
from the Main Frame. The Frame cable connector (indicated)
is attached to the plastic insert in the mast mount. Leave
the plastic insert and Frame cable connector in place and
carefully connect the Console Mast cable. Align the clips on
the cable connectors and make sure the connectors lock.
NOTICE:
Do not cut or pinch the cables. This step may
require two people.
8.
Using a 6mm hex wrench, install the Console Mast to
the Main Assembly. Align the curved washers so the surface
is flush with the Console Mast tube.
NOTICE:
Make sure the Console Cable does not fall into
the Console Mast. Do not cut or pinch the Con-
sole Cable.
6mm
X3
Frame
cable
connector