Schwinn 290 Recumbent Bike 2021 model Service Manual - Page 30

H Vxuh Wr Nhhs Àqjhuv Fohdu Ri Doo Slqfk Kd]dugv Dv

Get Schwinn 290 Recumbent Bike 2021 model PDF manuals and user guides View all Schwinn 290 Recumbent Bike 2021 model manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

10. &DUHIXOO\SXOOWKHROG%HOW7HQVLRQHURႇWKHSRVWRQWKH Main Frame. Slide it out from behind the Drive Pulley. Tensioner assembly View behind drive pulley Post Pivot hole 11. Slide the new Belt Tensioner into position. Be sure the pivot hole in the Tensioner assembly engages the post. Tensioner assembly Drive pulley 12. Using the 6 mm hex wrench, install the new Belt Tensioner to the Frame with the hardware removed in step 9. 13. Put the Drive Belt in position on the Flywheel Pulley. Put the Drive Belt in position around the Idler Pulley. Be sure that the upper portion of the Drive Belt is under the Idler Pulley. Slowly turn the Drive Pulley backward and carefully ease the Drive Belt onto the Drive Pulley. %HVXUHWRNHHSÀQJHUVFOHDURIDOOSLQFKKD]DUGVDV you turn the Drive Pulley. NOTICE: Be sure not to pinch or cut any cables. 14. Make sure the Drive Belt is aligned on the Flywheel Pulley, Belt Tensioner and Drive Pulley. 15. Using needlenose pliers, re-install the spring on the Belt Tensioner arm. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
30
10.
&DUHIXOO\ SXOO WKH ROG %HOW 7HQVLRQHU Rႇ WKH SRVW RQ WKH
Main Frame. Slide it out from behind the Drive Pulley.
11.
Slide the new Belt Tensioner into position. Be sure the
pivot hole in the Tensioner assembly engages the post.
12.
Using the 6 mm hex wrench, install the new Belt
Tensioner to the Frame with the hardware removed in step 9.
13.
Put the Drive Belt in position on the Flywheel Pulley. Put
the Drive Belt in position around the Idler Pulley. Be sure that
the upper portion of the Drive Belt is under the Idler Pulley.
Slowly turn the Drive Pulley backward and carefully ease the
Drive Belt onto the Drive Pulley.
%H VXUH WR NHHS ÀQJHUV FOHDU RI DOO SLQFK KD]DUGV DV
you turn the Drive Pulley.
NOTICE:
Be sure not to pinch or cut any cables.
14.
Make sure the Drive Belt is aligned on the Flywheel
Pulley, Belt Tensioner and Drive Pulley.
15.
Using needlenose pliers, re-install the spring on the Belt
Tensioner arm.
View behind drive pulley
Post
Post
Tensioner
Tensioner
assembly
assembly
Drive pulley
Tensioner assembly
Pivot
hole