Sanyo PLC-XM100/L RS232C Expand - Page 75

PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.11.25 CR_KEYDIS Command Command "CR_KEYDIS" [CR] Details Get status of RC/KEY (valid or invalid) Acceptable "000_%1" [CR] Response "NONE RC and KEY, both are valid %1 "RC RC is invalid "KEY KEY is invalid Unacceptable "Error Code" [CR] 9.11.26 CR_SECURITY Command Command "CR_ SECURITY" [CR] Details Get ON/OFF setting status of Security on menu. Acceptable "000_%1" [CR] Response %1 "ON PJ is locked "OFF PJ is not locked. Unacceptable "Error Code" [CR] 9.11.27 CR_PJLOCKNOW Command Command "CR_PJLOCKNOW" [CR] Details Get actual setting status of PIN code lock Acceptable "000_%1" [CR] Response "LOCK" ------ PJ is locked PIN code lock is set to ON1/ON2 on the menu and PJ PIN code is not entered, therefore PJ is actually locked. %1 "FREE" ------- PJ is unlocked (either A or B) A) PJ lock is set to OFF on the menu B) PJ lock is set to ON1/ON2 on the menu, but PIN code Lock mode is released because PJ PIN code is entered. Unacceptable "Error Code" [CR] 9.11.28 CR_PJLOCKMENU Command Command "CR_PJLOCKMENU" [CR] Details Get ON/OFF setting status of PIN code lock on menu Acceptable "000_%1" [CR] Response "ON1 PIN code lock ON 1 is set on the menu %1 "ON2 PIN code lock ON 2 is set on the menu "OFF PIN code lock OFF is set on the menu Unacceptable "Error Code" [CR] 9.11.29 CR_SHUTRCPROT Command Command "CR_SHUTRCPROT" [CR] Details Get status if Shutter can be controlled by R/C Acceptable "000_%1" [CR] Response %1 "ON Shutter is not controllable by R/C "OFF Shutter is controllable by R/C Unacceptable "Error Code" [CR] 75/79