Sanyo PLC-XM100/L RS232C Expand - Page 67
Lamp Status Read Command, CR_LAMPREPL Command, CR_LAMPH Command, CR_LAMPCORRESPH Command,
![]() |
View all Sanyo PLC-XM100/L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.9 Lamp Status Read Command 9.9.1 CR_LAMPREPL Command Command "CR_LAMPREPL" [CR] Details Get information of Lamp Replacement time Acceptable "000_%1" [CR] Response %1 "1Y indicates over lamp replacement time "1N indicates under lamp replacement time Unacceptable "?" [CR] 9.9.2 CR_LAMPH Command Command "CR_LAMPH" [CR] Details Get Lamp running time (in hours) * return actual lamp running time Response Acceptable %1 "000_%1" [CR] "00000 - 99999" Unacceptable "Error Code" [CR] 9.9.3 CR_LAMPCORRESPH Command Command "CR_LAMPCORRESPH" [CR] Details Get Lamp running time (in hours) *return lamp running time multiplied by a coefficient (not actual running time) Response Acceptable %1 "000_%1" [CR] "00000 - 99999" Unacceptable "Error Code" [CR] 9.9.4 CR_LAMPMODE Command Command "CR_LAMPMODE" [CR] Details Get setting status of Lamp mode Acceptable "000_%1" [CR] Response "NORMAL Lamp mode is Normal status %1 "ECO1 Lamp mode is Eco1 status "ECO2 Lamp mode is Eco2 status "AUTO Lamp mode is Auto status Unacceptable "?" [CR] 9.9.5 CR_LAMPSTS Command Command "CR_LAMPSTS" [CR] Details Get Lamp status Acceptable "000_%1" [CR] Response %1 "1I Lamp is ON "1O Lamp is OFF "1X Lamp Failure Unacceptable "Error Code" [CR] 67/79
![](/manual_guide/products/sanyo-plcxm150l-rs232c-expand-5c4ed26/67.png)