Sanyo PLC-XM100/L RS232C Expand - Page 53
CR_NZRED Command, CR_PROGV Command, CR_IMAGE Command, CR_IMGGMD Command
View all Sanyo PLC-XM100/L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.4.14 CR_NZRED Command Command "CR_NZRED" [CR] Details Get Noise Reduction setting status Acceptable "000_%1" [CR] Response %1 "OFF Cancel Noise Reduction "ON Set Noise Reduction Unacceptable "Error Code" [CR] 9.4.15 CR_PROGV Command Command "CR_PROGV" [CR] Details Get Progressive scan setting status Acceptable "000_%1" [CR] "ON Set Progressive scan On Response %1 "FILM Select FILM mode "OFF Set Progressive scan Off Unacceptable "Error Code" [CR] 9.4.16 CR_IMAGE Command Command "CR_IMAGE" [CR] Details Get image setting status Acceptable "000_%1" [CR] "STAND Standard "REAL Real "CINEMA Cinema "CUSTOM1 Image1" "CUSTOM2 Image2" "CUSTOM3 Image3" %1 "CUSTOM4 Image4" Response "CUSTOM5 Image5" "CUSTOM6 Image6" "CUSTOM7 Image7" "CUSTOM8 Image8" "CUSTOM9 Image9" "CUSTOM10 Image10" Unacceptable "Error Code" [CR When the command is invalid due to condition such as Input source. "?" [CR When unknown command is received 9.4.17 CR_IMGGMD Command Command "CR_IMGGMD" [CR] Details Get setting status of Standard/Real/Cinema in Image Gamma Acceptable "000_%1" [CR] "STD Standard Response %1 "REL Real "CNM Cinema Unacceptable "Error Code" [CR] 53/79