Panasonic PT-EX520 Operating Instructions - Page 98
Setting the audio output during standby, Setting the mute, Setting audio input selection
![]() |
View all Panasonic PT-EX520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Chapter 4 Settings - [PROJECTOR SETUP] menu Note ff Audio is output from the built-in speaker even if the cable is connected to the terminal. To output audio from external audio devices connected to the terminal and not from the built-in speaker, set [BUILT-IN SP] to [OFF]. Setting the audio output during standby 1) Press as to select [AUDIO SETTING]. 2) Press the button. ffThe [AUDIO SETTING] screen is displayed. 3) Press as to select [IN STANDBY MODE]. 4) Press qw to switch the item. ffThe items will switch each time you press the button. [OFF] [ON] Disables audio output in the standby mode. Enables audio output in the standby mode when [STANDBY MODE] is set to [NORMAL]. At this time, press the button/ button on the remote control or the control panel to adjust the volume. Note ff When [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO] (x page 94), even if [IN STANDBY MODE] is set to [ON], audio cannot be output during standby. ff When [IN STANDBY MODE] is set to [ON] and the digital signal is input, the audio output is interrupted during the cooling period after the power is turned off, but this is not a malfunction. Setting the mute 1) Press as to select [AUDIO SETTING]. 2) Press the button. ffThe [AUDIO SETTING] screen is displayed. 3) Press as to select [MUTE]. 4) Press qw to switch the item. ffThe items will switch each time you press the button. [OFF] [ON] Audio is output. Audio is not output. Setting audio input selection Choose the audio input terminal for each input signal. 1) Press as to select [AUDIO SETTING]. 2) Press the button. ffThe [AUDIO SETTING] screen is displayed. 3) Press as to select one item of [AUDIO IN SELECT]. [RGB1] [RGB2] [VIDEO] [HDMI1] [HDMI2] [DIGITAL LINK]*1 [NETWORK] Set the audio output when [RGB1] input is selected. Set the audio output when [RGB2] input is selected. Set the audio output when [VIDEO] input is selected. Set the audio output when [HDMI1] input is selected. Set the audio output when [HDMI2] input is selected. Set the audio output when [DIGITAL LINK] input is selected. Set the audio output when [NETWORK] input is selected. *1 Only for PT-EZ590, PT-EW650 and PT-EX620 4) Press qw to switch the item. ffThe sub items will switch each time you press the button. 98 - ENGLISH
![](/manual_guide/products/panasonic-ptew550u-operating-instructions-2d0cff7/98.png)