Panasonic ET-UK20 Geometry Manager Pro Ver.4.0 - Page 32
LAN connection destination selection screen, IP Address, User Name, Password, Connect / Search
![]() |
View all Panasonic ET-UK20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Adjustment and Settings Main screen LAN connection destination selection screen When is clicked, the LAN connection destination selection screen is displayed. A projector that is going to be connected now be set. IP Address Input here the IP address of the projector to be connected. To search for a connected projector, enter an IP address to start searching. End IP Address To search for a connected projector, select the check box and enter an IP address to end searching. Note zz Specify the same network address for the IP Address and End IP Address. zz If the search range is too wide, an error will occur when you start the search. Port Set here the number of the port that is to be connected to the projector. User Name Input here the user name of the projector to be connected. Password Input here the password of the projector to be connected. Exit Click to cancel the connection with the projector and close the LAN connection destination selection screen. Connect / Search When not searching for a connected projector, connection to the projector will be established according to the entered settings. When searching for a connected projector, the projector search will start according to the entered settings. A status screen is displayed while the search is in progress. "Starting and Exiting the Application − Projetor Search Screen" (page 22) When the projector is connected successfully, the LAN connection destination selection screen is closed. 32
![](/manual_guide/products/panasonic-ptrz21k-geometry-manager-pro-ver40-9934ce4/32.png)