Panasonic ET-UK20 Geometry Manager Pro Ver.4.0 - Page 30
Common operation area, Power ON/Standby, Shutter Close/Shutter Open, OSD ON/OSD OFF, Status
![]() |
View all Panasonic ET-UK20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Adjustment and Settings Main screen Common operation area The common operation area houses the operations which can be used in all the editing modes. Projector list This list displays the projector numbers, projector names and IP addresses in the sequence in which the projectors were connected. The projector currently selected is the one whose data is being edited. Any projector on the list can be selected to switch the projector whose data is to be edited. Note zz Multiple projectors can be selected as targets for operations by holding the Ctrl key while clicking. In that case, the following functions can be operated. Power ON/Standby, Shutter Close/Shutter Open, OSD ON/OSD OFF, Status ON/ Status OFF, Status Page, Test Pattern, Display Projector Name, Grid Resolution, Display Grid Lines zz When a projector for which the upgrade kit (ET-UK20) has not been applied is connected, an asterisk (*) appears to the left of that projector name. An error message will appear if you connect to this projector and attempt to use the extended functions. "Activation" (page 12) zz When a projector on the list is selected and then double-clicked, the WEB control screen opens. For details on the WEB control screen, refer to the operating instructions of the projector. zz When the mouse pointer is placed over a projector on the list, a tooltip appears and shows the model number and resolution of that projector. / These change the order of the projectors in the list. Select a projector in the list and then click the up arrow button to move it up one place in the list or click the down arrow button to move it down one place in the list. Note zz Multiple projectors cannot be moved at the same time. zz When the up arrow button is clicked while the very top projector is selected or when the down arrow button is clicked while the very bottom projector is selected, the projector does not move. zz The results of moving the projectors are reflected in Layout Window. "Layout Window" (page 29) Del Click to remove the selected projector from the operating targets. When all the projectors are removed, the software is exited. 30
![](/manual_guide/products/panasonic-ptrz21k-geometry-manager-pro-ver40-9934ce4/30.png)