Netgear UTM25S Reference Manual 3.0.1-124 - Page 502

ProSecure Unified Threat Management (UTM) Appliance The default poll interval is 5 seconds. To change the poll interval period, enter a new value in the Poll Interval field, and then click the Set Interval button. To stop polling, click the Stop button. To view the active L2TP tunnel users, select Monitoring > Active Users & VPNs > L2TP Active Users. The L2TP Active Users screen displays: Figure 294. The List of L2TP Active Users table lists each active connection with the information that is described in the following table. Table 131. L2TP Active Users screen information Item Username Remote IP L2TP IP Action Description The name of the L2TP user that you have defined (see Configure User Accounts on page 401). The client's IP address on the remote LAC. The IP address that is assigned by the L2TP server. Click the Disconnect table button to terminate the connection. (This button is displayed only when there an active connection.) The default poll interval is 5 seconds. To change the poll interval period, enter a new value in the Poll Interval field, and then click the Set Interval button. To stop polling, click the Stop button. View the Port Triggering Status  To view the status of the port-triggering feature: 1. Select Network Security > Port Triggering. The Port Triggering screen displays. (The following figure shows one rule in the Port Triggering Rules table as an example.) Monitor System Access and Performance 502