Netgear UTM25S Reference Manual 3.0.1-124 - Page 33

ProSecure Unified Threat Management (UTM) Appliance Table 3. LED descriptions UTM9S and UTM25S (continued) LED Activity Right LED Off On (amber) On (green) Active LED Off On (green) Wireless network module Module Off Status LED On (green) Wireless Link LED Off On (green) Blinking (green) On (yellow) Blinking (yellow) xDSL network modules Module Off Status LED On (green) Link LED Off On (green) On (yellow) Description The WAN port is operating at 10 Mbps. The WAN port is operating at 100 Mbps. The WAN port is operating at 1000 Mbps. The WAN port either is not enabled or has no link to the Internet. The WAN port has a valid Internet connection. The module is not enabled. The module is enabled. The wireless access point is not enabled. The wireless access point is enabled in 2.4-GHz operating mode. There is wireless activity in 2.4-GHz operating mode. The wireless access point is enabled in 5-GHz operating mode. There is wireless activity in 5-GHz operating mode. The module is enabled or has a link to the telephone line. The module either is not enabled or has no link to the telephone line. The xDSL port has no Internet connection. The xDSL port functions in ADSL mode. The xDSL port functions in VDSL mode. Rear Panel UTM5, UTM10, and UTM25 The rear panel of the UTM5, UTM10, and UTM25 includes the cable lock receptacle, the console port, the Factory Defaults reset button, and the AC power connection. Security lock receptacle Console port Figure 9. Rear panel of the UTM5, UTM10, and UTM25 Factory Defaults AC power reset button receptacle Introduction 33