Netgear UTM25S Reference Manual 3.0.1-124 - Page 50
Table 4., Setup Wizard Step 1: LAN Settings screen settings continued
View all Netgear UTM25S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
ProSecure Unified Threat Management (UTM) Appliance Table 4. Setup Wizard Step 1: LAN Settings screen settings (continued) Setting Description Enable DHCP Server Primary DNS (continued) Server This setting is optional. If an IP address is specified, the UTM provides this address as the primary DNS server IP address. If no address is specified, the UTM provides its own LAN IP address as the primary DNS server IP address. Secondary DNS This setting is optional. If an IP address is specified, the UTM Server provides this address as the secondary DNS server IP address. WINS Server This setting is optional. Enter a WINS server IP address to specify the Windows NetBIOS server, if one is present in your network. Lease Time Enter a lease time. This specifies the duration for which IP addresses are leased to clients. DHCP Relay Select the DHCP Relay radio button to use the UTM as a DHCP relay agent for a DHCP server somewhere else on your network. Enter the following setting: Relay Gateway The IP address of the DHCP server for which the UTM serves as a relay. Enable LDAP information Select the Enable LDAP information check box to enable the DHCP server to provide Lightweight Directory Access Protocol (LDAP) server information. Enter the following settings. Note: The LDAP settings that you specify as part of the VLAN profile are used only for SSL VPN and UTM authentication, but not for web and email security. LDAP Server The IP address or name of the LDAP server. DNS Proxy Search Base Port The search objects that specify the location in the directory tree from which the LDAP search begins. You can specify multiple search objects, separated by commas. The search objects include: • CN (for common name) • OU (for organizational unit) • O (for organization) • C (for country) • DC (for domain) For example, to search the Netgear.net domain for all last names of Johnson, you would enter: cn=Johnson,dc=Netgear,dc=net The port number for the LDAP server. The default setting is 0 (zero). Enable DNS Proxy This setting is optional. Select the Enable DNS Proxy radio button to enable the UTM to provide a LAN IP address for DNS address name resolution. This radio button is selected by default. Note: When the DNS Proxy option is disabled, all DHCP clients receive the DNS IP addresses of the ISP but without the DNS proxy IP address. Use the Setup Wizard to Provision the UTM in Your Network 50