Netgear UTM25S Reference Manual 3.0.1-124 - Page 119
LAN Configuration, ProSecure Unified Threat Management UTM Appliance, Table 23.
View all Netgear UTM25S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
ProSecure Unified Threat Management (UTM) Appliance Table 23. DMZ Setup screen settings (continued) Setting Description DHCP Disable DHCP Server If another device on your network is the DHCP server for the VLAN, or if you will configure the network settings of all of your computers manually, select the Disable DHCP Server radio button to disable the DHCP server. By default, this radio button is not selected, and the DHCP server is enabled. Enable DHCP Server Select the Enable DHCP Server radio button to enable the UTM to function as a Dynamic Host Configuration Protocol (DHCP) server, providing TCP/IP configuration for all computers connected to the VLAN. Enter the following settings: Domain Name This setting is optional. Enter the domain name of the UTM. Starting IP Address Enter the starting IP address. This address specifies the first of the contiguous addresses in the IP address pool. Any new DHCP client joining the LAN is assigned an IP address between this address and the ending IP address. The IP address 192.168.1.2 is the default start address. Ending IP Address Enter the ending IP address. This address specifies the last of the contiguous addresses in the IP address pool. Any new DHCP client joining the LAN is assigned an IP address between the starting IP address and this IP address. The IP address 192.168.1.100 is the default ending address. Primary DNS Server Secondary DNS Server WINS Server Note: The starting and ending DHCP IP addresses should be in the same network as the LAN TCP/IP address of the UTM (that is, the IP address in the DMZ Port Setup section as described earlier in this table). This setting is optional. If an IP address is specified, the UTM provides this address as the primary DNS server IP address. If no address is specified, the UTM provides its own LAN IP address as the primary DNS server IP address. This setting is optional. If an IP address is specified, the UTM provides this address as the secondary DNS server IP address. This setting is optional. Enter a WINS server IP address to specify the Windows NetBIOS server, if one is present in your network. Lease Time Enter a lease time. This specifies the duration for which IP addresses are leased to clients. DHCP Relay To use the UTM as a DHCP relay agent for a DHCP server somewhere else in your network, select the DHCP Relay radio button. Enter the following setting: Relay Gateway The IP address of the DHCP server for which the UTM serves as a relay. LAN Configuration 119