Netgear UTM10EW3-100NAS Reference Manual 3.0.1-124 - Page 64

ProSecure Unified Threat Management (UTM) Appliance Table 12. Setup Wizard Step 9: Signatures & Engine screen settings (continued) Setting Description Update Frequency Specify the frequency with which the UTM checks for file updates: • Weekly. From the drop-down lists, select the weekday, hour, and minutes that the updates occur. • Daily. From the drop-down lists, select the hour and minutes that the updates occur. • Every. From the drop-down list, select the frequency with which the updates occur. The range is from 15 minutes to 12 hours. HTTPS Proxy Settings Enable If computers on the network connect to the Internet through a proxy server, select the Enable check box to specify and enable a proxy server. Enter the following settings. Proxy server The IP address and port number of the proxy server. User name The user name for proxy server authentication. Password The password for proxy server authentication. After you have completed the steps in the Setup Wizard, you can change the signatures and engine settings by selecting Administration > System Update > Signatures & Engine. For more information about these settings, see Update the Scan Signatures and Scan Engine Firmware on page 454. Setup Wizard Step 10 of 10: Saving the Configuration Figure 35. Click Apply to save your settings and automatically restart the system. Use the Setup Wizard to Provision the UTM in Your Network 64