Netgear UTM10EW3-100NAS Reference Manual 3.0.1-124 - Page 416

ProSecure Unified Threat Management (UTM) Appliance 3. Click the Add table button. The new VLAN is added to the List of VLAN table. To delete a user from the List of VLAN table, click the Delete table button in the Action column for the VLAN that you want to delete. Configure Global User Settings You can globally set the user session settings for authenticated users. These settings include the session expiration period, the allowed session idle time, and the default domain that is presented to the users. 1. To specify the global user configuration settings: 2. Select Users > Configuration. The Configuration screen displays: Figure 250. 3. Locate the Session Parameters section on screen. Specify the session settings: • Session Expiration Length. The period after which a session expires and a user needs to log in again. This setting applies to all users. From the drop-down list, select either Minutes or Hours. Then, in the field to the left of the drop-down list, enter a number for the minutes or hours. The session expiration length cannot exceed the idle time period. By default, the session expiration length is 24 hours. Note: For information about how to set the time-out period for the web management interface, see Change Passwords and Administrator and Guest Settings on page 436. • Idle Time. The period after which an idle connection is terminated and a user needs to log in again. This setting applies to all users. From the drop-down list, select either Minutes or Hours. Then, in the field to the left of the drop-down list, enter a number for the minutes or hours. The idle time period cannot exceed the session expiration length. By default, the idle time period is 8 hours. Manage Users, Authentication, and VPN Certificates 416