Netgear UTM10EW3-100NAS Reference Manual 3.0.1-124 - Page 590

ProSecure Unified Threat Management (UTM) Appliance Table 151. Add Wireless Profiles screen settings (continued) Field SSID Broadcast SSID Security Description The wireless network name (SSID) for the wireless profile. The default SSID name is netgear-1. You can change this name by entering up to 32 alphanumeric characters. Make sure that additional SSIDs have unique names. Select the check box to enable the wireless profile to broadcast its SSID, allowing wireless clients that have a null (blank) SSID to adopt the wireless profile's SSID. To prevent the SSID from being broadcast, clear the check box. Note: Before you configure security, you might want to read Wireless Data Security Options on page 584. Specify the wireless security by making a selection from the drop-down list: • OPEN. This is the default setting. An open system has no authentication and no encryption, and therefore no security configuration. However, you can use an open system with encryption. To do so, select WEP from the Security drop-down list. In the WEP Index and Keys section of the screen, take the following steps: - Select Open System authentication. - Select the encryption. - Enter a passphrase and generate a key, or enter a key manually. • WEP. To configure WEP, take the following steps in the WEP Index and Keys section of the screen: - Select Shared Key authentication. - Select the encryption. - Enter a passphrase and generate a key, or enter a key manually. • WPA. To configure WPA, select the encryption and authentication. The remaining configuration depends on the selected authentication: - For WPA-PSK, select a password. - For WPA with RADIUS, configure the RADIUS server settings. - For WPA with PSK+RADIUS, select a password and configure the RADIUS server settings. • WPA2. To configure WPA2, select the encryption and authentication. The remaining configuration depends on the selected authentication: - For WPA2-PSK, select a password. - For WPA2 with RADIUS, configure the RADIUS server settings. As an option, you can enable RADIUS preauthentication. - For WPA2 with PSK+RADIUS, select a password and configure the RADIUS server settings. As an option, you can enable RADIUS preauthentication. • WPA+WPA2. To configure WPA, select the encryption and authentication. The remaining configuration depends on the selected authentication: - For WPA+WPA2 with PSK, select a password. - For WPA+WPA2 with RADIUS, configure the RADIUS server settings. - For WPA+WPA2 with PSK+RADIUS, select a password and configure the RADIUS server settings. Wireless Network Module for the UTM9S and UTM25S 590