Netgear UTM10EW3-100NAS Reference Manual 3.0.1-124 - Page 282

ProSecure Unified Threat Management (UTM) Appliance Note: This is the name for the authentication phase that is used only for the VPN client, not during IKE negotiation. You can view and change this name in the tree list pane. This name needs to be a unique name. The Authentication pane displays in the Configuration Panel screen, with the Authentication tab selected by default. Figure 167. 4. Specify the settings that are explained in the following table. Table 67. VPN client authentication settings Setting Description Interface Remote Gateway Preshared Key IKE Select Any from the drop-down list. Enter the remote IP address or DNS name of the UTM. For example, enter 10.34.116.22. Select the Preshared Key radio button. Enter the pre-shared key that you already specified on the UTM. For example, enter I7!KL39dFG_8. Confirm the key in the Confirm field. Encryption Select the 3DES encryption algorithm from the drop-down list. Authentication Select the SHA1 authentication algorithm from the drop-down list. Key Group Select the DH2 (1024) key group from the drop-down list. Note: On the UTM, this key group is referred to as Diffie-Hellman Group 2 (1024 bit). Virtual Private Networking Using IPSec, PPTP, or L2TP Connections 282