Marantz M-CR612 Owners Manual English - Page 33
Wireless LAN
View all Marantz M-CR612 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Contents Connections Playback Wireless LAN See "Wi-Fi Setup" on how to connect to a wireless LAN router. (v p. 105) Internet Modem To WAN side Router with access point Settings Tips Appendix 0 When using this unit, we recommend you use a router equipped with the following functions: 0 Built-in DHCP server This function automatically assigns IP addresses on the LAN. 0 Built-in 100BASE-TX switch When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater. 0 Only use a shielded STP or ScTP LAN cable (readily available at electronics stores). (CAT-5 or greater recommended) 0 The normal shielded-type LAN cable is recommended. If a flat-type cable or unshielded-type cable is used, other devices could be affected by noise. 0 When using this unit connected to a network with no DHCP function, configure the IP address, etc. in "Network". (v p. 103) NOTE 0 The types of routers that can be used depend on the ISP. Contact your ISP or a computer shop for details. 0 This unit is not compatible with PPPoE. A PPPoE compatible router is required if your contracted line is not set using PPPoE. 0 Do not connect a NETWORK connector directly to the LAN port/ Ethernet connector on your computer. 0 Various online services may be discontinued without prior notice. . Front panel Rear panel Remote control 33 unit Index