LiftMaster RSL12U RSL12U Installation Manual - Page 7

OPERATOR SPECIFICATIONS, External Entrapment Protection Type B1 and/or Type B2 - solar

Page 7 highlights

INTRODUCTION OPERATOR SPECIFICATIONS This model is intended for use in vehicular slide gate applications: Usage Classification Main AC Supply System Operating Voltage Accessory Power Solar Power Max Maximum Gate Weight Maximum Gate Travel Distance Maximum Gate Travel Speed Maximum Daily Cycle Rate Maximum Duty Cycle Operating Temperature Expansion Board Inherent Entrapment Protection (Type A) External Entrapment Protection (Type B1 and/or Type B2) Class I & II 120 Vac, .5 Amps (6.5 Amps including Accessory Outlets) 12 Vdc Battery Run / Battery Backup 12 Vdc, 500mA max. for ON + SW (switched) 12 Vdc at 30 watts max. 800 lbs (363.6 kg) 25 feet (7.62 m) 10 inches/second 120 cycles/day Continuous Without Heater: -20°C to 60°C (-4°F to 140°F) With Optional Heater: -40°C to 60°C (-40°F to 140°F) Optional Dual - RPM and Current Sense 3 inputs on main board - 3 photoelectric sensors and up to 2 edge sensors 15-3/16" MOUNTING FOOTPRINT .63" 20-3/8" 7.49" 10-1/2" 13.65" 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

6
OPERATOR SPECIFICATIONS
This model is intended for use in vehicular slide gate applications:
INTRODUCTION
10-1/2"
20-3/8"
15-3/16"
Usage Classification
Class I & II
Main AC Supply
120 Vac, .5 Amps (6.5 Amps including Accessory Outlets)
System Operating Voltage
12 Vdc Battery Run / Battery Backup
Accessory Power
12 Vdc, 500mA max. for ON + SW (switched)
Solar Power Max
12 Vdc at 30 watts max.
Maximum Gate Weight
800 lbs (363.6 kg)
Maximum Gate Travel Distance
25 feet (7.62 m)
Maximum Gate Travel Speed
10 inches/second
Maximum Daily Cycle Rate
120 cycles/day
Maximum Duty Cycle
Continuous
Operating Temperature
Without Heater: -20°C to 60°C (-4°F to 140°F)
With Optional Heater: -40°C to 60°C (-40°F to 140°F)
Expansion Board
Optional
Inherent Entrapment Protection (Type A)
Dual - RPM and Current Sense
External Entrapment Protection (Type B1 and/or Type B2)
3 inputs on main board - 3 photoelectric sensors and up to 2 edge sensors
13.65"
MOUNTING FOOTPRINT
7.49"
.63"