Kyocera ECOSYS M6630cidn M6230cidn/M6235cidn/M6630cidn/M6635cidn Operation Gui - Page 80
Network Setup, Configuring the Wired Network
View all Kyocera ECOSYS M6630cidn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Installing and Setting up the Machine > Network Setup Network Setup Configuring the Wired Network The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4), TCP/IP (IPv6), NetBEUI, and IPSec. It enables network printing on the Windows, Macintosh, UNIX and other platforms. Set up TCP/IP (IPv4) to connect to the Windows network. The configuration methods are as follows Configuration Method Description Reference Page Configuring the Connection from the Operation Panel on This Machine Use Quick Setup Wizard when configuring the network in a wizardstyle screen, without setting individually in System menu. Quick Setup Wizard (page 2-35) Configuring Connections on the Web Page For the equipped network interface, the connection can be set by using Command Center RX. For the optional IB-50, the connection can be set by using the dedicated Web page. Command Center RX User Guide IB-50 Operation Guide Setting the Connection by Using the Setup Utility of IB-50 This is the setup tool included in the CD of IB-50. You can use it on Windows. IB-50 Operation Guide Be sure to connect the network cable before configuring the settings. Connecting LAN Cable (page 2-8) For other network settings, refer to the following: Network (page 8-27) NOTE If user login administration is enabled, you can only change the settings by logging in with administrator privileges. If user login administration is disabled, the user authentication screen appears. Enter a login user name and password, and select [Login]. The factory default login user name and login password are set as shown below. ECOSYS M6230cidn ECOSYS M6630cidn ECOSYS M6235cidn ECOSYS M6635cidn Login User Name: 3000 3500 Login Password: 3000 3500 2-25