Kyocera ECOSYS M6630cidn M6230cidn/M6235cidn/M6630cidn/M6635cidn Operation Gui - Page 306

Setup and Registration (System Menu) > System Menu Item Auto cassette Change Resolution KIR Gloss Mode Printing Job Terminator Description Select the following actions when the paper runs out in the paper source while printing. Value: Off, On NOTE When selecting [Off], the machine displays "Add the following paper in cassette #." (# is a cassette number) or "Add the following paper in the multi purpose tray.", and stops printing. Load the paper according to the paper source displayed to resume printing. To print from the other paper cassette, select [Paper Selection]. Select the desired paper source. When selecting [On], the machine continues printing automatically when the other cassette contains the same paper as the currently-used cassette. Set the resolution used for printing. Value: 600 dpi, 1200 dpi NOTE Settings that are received from the printer driver have priority over the operation panel settings. Select the default KIR (smoothing) setting. Value: Off, On Gloss Mode increases the effect of glossiness in printing. However, printing takes longer time. Value: Off, On IMPORTANT Gloss Mode is not available when [Labels] or [Transparency] is selected as the paper type setting. Cassette/MP Tray Settings (page 8-8) Depending on the paper used, printing in gloss mode may cause curl in paper. To reduce curl, try using thicker paper. Set the condition to be regarded as the job end if the print job has not been processed to the end due to the usage environment or for other reasons. Value: EOJ (End of Job): Up to the detection of a command indicating the end of job data is regarded as one job. End of Network Session: Data contained in one session of network connection is regarded as one job. UEL (Universal Exit Language): Up to detection of UEL at the end of the job is regarded as one job. 8-26