Kyocera ECOSYS M6630cidn M6230cidn/M6235cidn/M6630cidn/M6635cidn Operation Gui - Page 308

Setup and Registration (System Menu) > System Menu Item Description Setup - Connection Status Check the wireless LAN status. Quick Setup Wizard If the machine will connect to an access point that supports the automatic wireless network setup, connection settings can be configured by Quick Setup. NOTE When [Reload] is selected, the list is reloaded. If you are connecting to an access point that has WEP enabled, select [WEP Key Index] and select the WEP key index. Available Network Displays access points to which the machine can connect. WEP Key Index Select the key index of the access point. Value: 0 to 3 Push Button Method If the access point supports the push button method, wireless settings can be configured using the push button. This setting executes push button, and the connection is started by pressing the push button on the access point. NOTE The push button method supports only the WPS. PIN Code Method (Device) Starts connection using the machine's PIN code. Enter the PIN code into the access point. The PIN code of the machine is automatically generated. Custom Setup The detailed settings for wireless LAN can be changed. Network Name (SSID) Set the SSID (Service Set Identifier) of the wireless LAN to which the machine connects. NOTE Up to 32 characters can be entered. Network Authentication Select network authentication type. Value: Open, WPA2/WPA-PSK, WPA2-PSK, WPA2/WPA-EAP, WPA2-EAP Encryption Select encryption method. The setting values vary depending on the Network Authentication setting. Network Authentication Open WPA2/WPA-PSK WPA2-PSK WPA2/WPA-EAP WPA2-EAP Encryption Disable ― WEP WEP Key: Up to 26 characters WEP Key Index: 0 to 3 Data Encryption: AES, Auto Preshared Key: Up to 64 characters Data Encryption: AES, Auto Preshared Key: Up to 64 characters Data Encryption: AES, Auto Data Encryption: AES, Auto 8-28