Kyocera ECOSYS M6630cidn M6230cidn/M6235cidn/M6630cidn/M6635cidn Operation Gui - Page 415
Enter the appropriate value., Registration, Start
View all Kyocera ECOSYS M6630cidn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 415 highlights
Troubleshooting > Troubleshooting 4 Enter the appropriate value. 1 Find the location on each chart where 2 lines most closely match. If this is the 0 position, registration for that color is not required. For the illustration, B is the appropriate value. From charts H-1 to H-5, read the values from H-1 to H-5. From charts V-1/3/5, read only the values from V-3 (center). 2 Select [Registration]. 3 Select the chart to be corrected. 4 Select [+] or [-] to enter the values read from the chart. Select [+] to increase the value from 0 to 9. To decrease, select [-]. By selecting [-], the value changes from 0 to alphabetic letters, going from A to I. To move in the reverse direction, select [+]. You cannot use the numeric keys to enter these values. 5 Repeat steps 3 and 4 to enter the registration values for each chart. 6 Select [Start] after all values have been entered. Color registration begins. 7 Select [OK] after color registration is complete. 10-34