Konica Minolta Fujitsu fi-5950 Operating Guide - Page 251
Document Quality on Maxi, mum Document Loading Capacity on USB 1.1
View all Konica Minolta Fujitsu fi-5950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
(* 1) For details, refer to "7.2 Document Quality" on page 159. (* 2) The scanning speed is the maximum speed of the scanner hardware. The actual speed may be slower due to the system overhead such as data transfer time. (* 3) With JPEG compression enabled (* 4) The maximum capacity varies depending on the document thickness. Refer to"7.3 Maximum Document Loading Capacity" on page 162 . (* 5) The SCSI and USB interface cannot be used together. (* 6) When using USB 2.0, you have to use a port compatible to USB 2.0. When connecting to USB 1.1, the scanning speed will decrease. (* 7) Avoid connecting other SCSI devices to the same bus. It can reduce the scanner throughput. (* 8) You can imprint alphabetic characters and number on the scanned document. The fi-590PRF (pre-imprinter) will print prior to scanning on the front side of the document. The fi-590PRB (post-imprinter) will print after the scanning on the back side of the document. You can install both the fi-590PRF and fi-590PRB, but you cannot use them at the same time. 10 SCANNER SPECIFICATIONS 10.1 Basic Product Specifications 231