Konica Minolta Fujitsu fi-5950 Operating Guide - Page 240
Overscan Control
![]() |
View all Konica Minolta Fujitsu fi-5950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
8.28 Overscan Control Specify [Optimize] when you use Overscan and the image is partially missing due to an abnormal skew. You can detect abnormal image skew and set sufficient amount of black margins on the top and the bottom so that the whole image is contained. missing Added margin Added margin When parts of the image are missing When [Optimize] is specified Configure the settings for Overscan Control as follows. 1. Start up the Software Operation Panel. Refer to "8.1 Scanner Settings" on page 173. 2. Select [Device Setting 2] from left side list in the window, and select [Overscan Control] from its lower level. 220 8.28 Overscan Control
![](/manual_guide/products/konica-minolta-fujitsu-fi5950-operating-guide-9c1f79c/240.png)
220
8.28 Overscan Control
8.28 Overscan Control
Specify [Optimize] when you use Overscan and the image is partially missing due to an abnormal skew.
You can detect abnormal image skew and set sufficient amount of black margins on the top and the bottom
so that the whole image is contained.
Configure the settings for Overscan Control as follows.
1.
Start up the Software Operation Panel.
Refer to
“8.1 Scanner Settings” on page 173
.
2.
Select [Device Setting 2] from left side list in the window, and select
[Overscan Control] from its lower level.
Added margin
Added margin
When parts of the image are
missing
When [Optimize] is specified
missing