Intermec CV30 Intermec Terminal Emulator (ITE) Programmer's Reference Manual - Page 109
Flow Control, Transmit Only supports XON/XOFF.
View all Intermec CV30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Chapter 3 - Extended Commands Flow Control Control Character Sequence Example Descriptions Characters Description ^9F #P 5E72 010 08 PC character 0x9F Begin extended command for transmit only 19200 baud, even parity, 7 data bits, 2 stop bits Enable DTR Flow control Wait up to 8 seconds for return of DSR Data to send=0A=0D Sending string with CR, LF # Begin extended command terminating character ^9C ST character 0x9C The output stream takes the form of ASCII characters. For nondisplayable ASCII characters, you may insert the "=yy" characters, where "yy" is the hexadecimal representation of the output byte. The following table describes the line and columns where characters must appear, and their meanings. The symbol "b" indicates a 1-byte space. Control Character Sequence Method Column Description Character 2 Begin extended command. # 3 Transmit Only on P RS-232 Port command. 4 Speed (bits per second). 1=1200; 2=2400; 3=4800; 4=9600; 5=19200; 6=38400; 7=57600; 8=115200 5 Data parity. N=None; 0 (zero)=None; b=None; E=Even; O=Odd 6 7 8-9 10 11-12 Data bits. Stop bits. Reserved. XON/XOFF flow control. Flow control timeout value. 7=Seven; 8=Eight 1=One; 2=Two bb 0=Disable; 1=Enable XX=Number of seconds Transmit Only supports XON/XOFF. Intermec Terminal Emulator (ITE) Programmer's Reference Manual 97