Icom IC-M37 Instruction Manual - Page 27

SET MODE 8 CH Display " "/" "/" " Selects the number of digits to display the Low Battery Alarm " " Selects whether or not an alarm sounds 1 channel number. You can select settings for each channel group. when the battery is low. A beep sounds every time the battery indication is lower 2 3d: T he channel number is displayed in 3 digits, such as "78A." than a displayed value. The beep interval changes, as shown below, according to the 3 4d: T he channel number is displayed in 4 number of bars displayed. 4 digits, such as "1078." Beep interval Float'n Flash " " Option 5 Turns the Float'n Flash function ON or OFF. You can easily retrieve the transceiver from Battery Charging exhausted required Mid 6 the water. LL This function works even if the transceiver OFF This function is OFF. 7 is turned OFF. OFF: This function is OFF. ON: The backlight, LED, or both of them send out intermittent light when the 1 - 2 Every 30 seconds Every - 8 9 transceiver is floating on the water. LL This function is temporally OFF, and 3 minute Every 2 minutes 10 the transceiver can be operated when any key is pushed. This Delay Timer Subfunction " " 11 function is turned ON in 10 seconds after releasing the key. Sets the Delay Timer Subfunction to 10, 12 30, 60 seconds, or OFF. A sub function is Float'n Flash Alarm " " turned OFF after the set period of time has 13 Selects whether or not an alarm sounds while the light blinks when the transceiver passed after releasing a specific key. LL When the timer is set to OFF, the sub function 14 is floating on the water. LL This function is usable only when the is turned OFF when releasing the specified key. LL See page 13 for details. 15 Float'n Flash is turned ON. OFF: The alarm does not sound. Auto SP Line Convert " " 16 ON: The alarm sounds while the light blinks when the transceiver is Turns the Auto SP Line Convert function ON or OFF. 17 floating on the water. CAUTION: The alarm sounds loudly. LL The speaker is converted into a microphone by pushing [VOL/SQL] while holding down [PTT], regardless of this setting. (p. 11) 18 Float'n Flash Power Save " " OFF: This function is OFF. ON: Automatically converts the speaker Turns the Float'n Flash Power Save into a microphone, when the function ON or OFF. transceiver is floating on the water. LL This function is usable only when the Float'n Flash is turned ON. OFF: This function is OFF. ON: When the transceiver floats on the water, it enters the Float'n Flash Power Save mode to conserve battery power. 19