Icom IC-M37 Instruction Manual - Page 23
Favorite channels, Starting a scan (Except the HOL version), Setting/Clearing, Selecting
View all Icom IC-M37 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
SCAN OPERATION 6 ■■ Favorite channels You can quickly recall often-used channels by setting them as Favorite channels. You can set Favorite channels in each Channel Group. DDSetting/Clearing 1. Push [▲] or [▼] to select the channel. 2. Hold down [FAV] for 1 second to set or clear as a Favorite channel. ••The selected channel is set as a Favorite channel, and " " is displayed. DDSelecting zz Push [FAV]. 6 LL Non-Favorite channels are skipped and not displayed. TIP: You can clear all Favorite channels. LL If there is no Favorite channel, all channels will be set as Favorite channels. 1. Turn OFF the transceiver. 2. While holding down [FAV], turn ON the transceiver. ■■ Starting a scan (Except the HOL version) Example: Starting a Normal Scan. 1. Push [SCAN] to start the scan. ••"SCAN" blinks during a Normal Scan. ••" " is also displayed during a Priority Scan. ••" " is displayed when a signal is received. LL When a signal is received, the scan pauses until it disappears, or resumes after 5 seconds, depending on the Set mode setting. (p. 18) LL 2 beeps sound and " " blinks when a signal is received on Channel 16 during a Priority scan. 2. Push [SCAN] to stop the scan. TIP: In order to properly receive signals, be sure to adjust the squelch to a suitable level. 15