Icom IC-M37 Instruction Manual - Page 11

ACCESSORIES 2 DDBattery pack To insert: 1. Use a coin or standard screwdriver (1), and turn the screw counter clockwise one 1 quarter turn (2). 2 w 3 q 4 Screw position when Screw position when 5 removing the battery cover. attaching the battery cover. 2. Open the battery cover (1), and place the battery pack into the transceiver so it fits 6 flat (2). 3. Securely attach the battery cover. 7 8 9 10 11 To remove: Slide the latch and then lift the battery cover to remove it. Then remove the battery pack. 12 CAUTION: 13 ••NEVER remove the battery cover when the transceiver is wet or soiled. This may result in water or dust getting into the transceiver/battery pack, and may result in the 14 transceiver being damaged. ••When attaching or removing the battery cover, make sure the rubber seal is correctly 15 set in the groove of the cover. If the seal is not correctly in the groove, it may be damaged when attaching the battery cover. If the seal is damaged, waterproof 16 protection is not guaranteed. ••When attaching the battery cover, make sure dust or other material does not adhere 17 to the rubber seal. If dust or other material is on the seal when attaching the battery cover, waterproof protection may not be guaranteed. 18 Be sure that the rubber seal is correctly seated in the groove, and there is no dust Correct position or other material on it. Battery cover Incorrect position Rubber seal Groove Battery cover 3