Icom IC-M37 Instruction Manual - Page 12

3 PANEL DESCRIPTION ■■ Front, top and side panels 1 11 5 SCAN/DUAL KEY [SCAN]/[DUAL] ••Push to start or stop a scan. (p. 15) ••Hold down for 1 second to start the Function display 10 Dual/Tri-watch mode. (p. 16) LL While in Dualwatch, push to cancel Dualwatch. LL Tri-watch may start, depending on the 2 Set mode settings. 9 ••Hold down both [SCAN] and [Hi/Lo] for 1 second to turn ON the AquaQuake 3 function. (p. 12) 8 6 POWER KEY [ ] Hold down for 1 second to turn the 4 7 transceiver ON or OFF. 5 6 7 TRANSMIT POWER/LOCK KEY [Hi/Lo]/[ ] Speaker ••Push to set the power level to High or Low. Microphone LL Some channels are set to only Low power. ••Hold down for 1 second to lock or 1 SPEAKER/MIC JACK [SP/MIC] unlock the keypad. (p. 23) 8 CHANNEL/WEATHER CHANNEL*1 Connect the optional HM-213 speaker KEY [CH/WX]/[U/I/C] or [CH] microphone here. ••Push to switch between a regular 2 PTT SWITCH [PTT] Hold down to transmit, release to receive. 3 CHANNEL 16/CALL CHANNEL KEY channel and weather channel.*1 (p. 10) ••Push to select a regular channel.*2 ••Hold down for 1 second to change the channel group. (p. 9) [16/C] (p. 9) NOTE: [CH] is described as [CH/WX] ••Push to select Channel 16. or [U/I/C] in this instruction manual. ••Hold down for 1 second to select the Call channel. 9 FAVORITE CHANNEL KEY [FAV] (p. 15) 4 VOLUME/SQUELCH/MONITOR KEY [VOL/SQL]/[MONI] ••Push once to display the volume level ••Push to select a Favorite channel. ••Hold down for 1 second to set or clear the selected channel as a Favorite channel. setting screen. (p. 11) 10 UP/DOWN KEYS [▲]/[▼] ••Push twice to display the squelch level ••Push to select the operating channel. setting screen. (p. 12) ••Push to change the volume/squelch ••Hold down for 1 second to turn ON the level while adjusting. monitor function. (p. 12) ••In the Set mode, push to select an item option. 11 ANTENNA CONNECTOR (p. 2) Connect the supplied antenna here. *1 For the USA, EXP, and AUS versions *2 For the EUR, FRG, HOL, and UK versions 4