HP R1.5 HP UPS Network Module User Guide - Page 76

Item Configuration menu access control Date and time Settings/AUX connector Description Password: admin (not modifiable) Synchronize with HP Power Protector 9600 bits/s, 8 bits, 1 bit stop, no parity Default parameters Parameter Network IP address Subnet mask Gateway Address BOOTP/DHCP IPv6 Enabled IPv6 Auto Config Enabled Firmware Upload SMTP server System UPS Contact UPS Location History log interval (sec.) Default Language Notified Application table - Access control User name Password SNMP Community name read Trap port SNMP Version Read-Only User Read-Only Security Level Read-Only Password Read-Write User Read-Write Security Level Read-Write Password Date and time Date and time adjustment NTP server Serial link Default value Possible value - - 192.168.1.2 Network IP address 255.255.0.0 Network IP address 0.0.0.0 Network IP address Enabled Active / Deactivated Enabled Active / Deactivated Enabled Active / Deactivated Enabled Active / Deactivated smtpserver 49 characters maximum - - Computer Room Manager 49 characters maximum Computer Room 31 characters maximum 60 10 to 99999 sec. English English / Japanese - - empty NA - - admin 5 characters minimum, 31 characters maximum admin 5 characters minimum, 31 characters maximum - - public 32 alphanumeric characters maximum, no spaces 162 Not configurable V1&V3 Disabled, V1, V3, V1&V3 readuser 1 character minimum, 32 characters maximum Authentication None, Authentication, Authentication&Privacy readuser 8 characters minimum, 24 characters maximum wirteuser 1 character minimum, 32 characters maximum Authentication&Privacy None, Authentication, Authentication&Privacy writeuser 8 characters minimum, 24 characters maximum - - Accept automatic update from Synchronize with an NTP server, Accept HP Power Protector automatic update from HP Power Protector, Synchronize manually ntpserver 49 characters maximum - - Specifications 76