HP R1.5 HP UPS Network Module User Guide - Page 48
HP UPS Network Module Configuration Menu, HP UPS Network Module Configuration Menu overview,
View all HP R1.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
HP UPS Network Module Configuration Menu HP UPS Network Module Configuration Menu overview The HP UPS Network Module Configuration Menu provides an alternative, limited interface to the UPS Network Module. System network values can be configured through the Configuration Menu and saved to the UPS Network Module. NOTE: All parameters included in the UPS Network Module Configuration Menu can also be configured using the HP UPS Network Module web interface. Accessing the Service Menu You can access the Configuration Menu locally by launching a terminal emulation program (on page 14). On the terminal emulation session screen running on the host computer: 1. Press any key. The initialization process completes, and you are prompted to enter the password. 2. At the prompt, enter admin. The HP UPS Network Module Configuration Menu appears. Navigating the menus After you have successfully initiated a terminal emulation session, the UPS Network Module Configuration Menu appears. • Open a submenu by entering the corresponding option number at the prompt. • To enter or change configuration information, follow the on-screen prompts. • Enter 0 at the submenu prompt to go to the previous menu. -orEnter 0 at the Main menu prompt to exit the utility. • Press the Enter key to refresh the screen. • You must restart the UPS Network Module to allow configuration changes to take effect. Main menu This menu only appears when accessing the UPS Network Module using a terminal emulation program. Option number 1 Submenu Reset Description Resets the UPS Network Module HP UPS Network Module Configuration Menu 48