Epson WorkForce Enterprise AM-C6000 Users Guide - Page 72
Mail Server Setting Items, Settings, General Settings, Network Settings, Standard, Additional
![]() |
View all Epson WorkForce Enterprise AM-C6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Preparing the Printer and Making Initial Settings > Preparing and Setting Up the Printer Accordin... You can check the IP address of the printer from the following menu. Settings > General Settings > Network Settings > (Standard or Additional) > Network Status > Wired LAN/Wi-Fi Status 2. Enter the administrator password to log in as an administrator. 3. Select in the following order. Network tab > Email Server > Basic 4. Enter a value for each item. 5. Select OK. The settings you have selected are displayed. Related Information & "Running Web Config on a Web Browser" on page 530 Mail Server Setting Items Items Authentication Method Authenticated Account Authenticated Password Sender's Email Address SMTP Server Address SMTP Server Port Number Settings and Explanation Specify the authentication method for the printer to access the mail server. Off Set when the mail server does not need authentication. SMTP AUTH Authenticates on the SMTP server (outgoing mail server) when sending the email. The mail server needs to support SMTP authentication. POP before SMTP Authenticates on the POP3 server (receiving mail server) before sending the email. When you select this item, set the POP3 server. If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the authenticated account name between 0 and 255 characters in ASCII (0x20-0x7E). When you select SMTP AUTH, enter the SMTP server account. When you select POP before SMTP, enter the POP3 server account. If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the authenticated password between 0 and 20 characters in ASCII (0x20-0x7E). When you select SMTP AUTH, enter the authenticated account for the SMTP server. When you select POP before SMTP, enter the authenticated account for the POP3 server. Enter the sender's email address such as the email address of the system administrator. This is used when authenticating, so enter a valid email address that is registered to the mail server. Enter between 0 and 255 characters in ASCII (0x20-0x7E) except for A period "." cannot be the first character. Enter between 0 and 255 characters using A-Z a-z 0-9 . - . You can use IPv4 or FQDN format. Enter a number between 1 and 65535. 72
![](/manual_guide/products/epson-workforce-enterprise-amc4000-users-guide-502658c/72.png)