Epson WorkForce Enterprise AM-C6000 Users Guide - Page 361

Faxing (Fax-Capable Printers Only) > Menu Options for Faxing > Menu Add Sender Information: ❏ Add Sender Information Select the position where you want to include the header information (sender name and fax number) in the outgoing fax, or not to include the information. - Off: Sends a fax with no header information. - Outside of Image: Sends a fax with header information in the top white margin of the fax. This keeps the header from overlapping with the scanned image, however, the fax received by the recipient may be printed across two sheets depending on the size of the originals. - Inside of Image: Sends a fax with header information approximately 7 mm lower than the top of the scanned image. The header may overlap with the image, however, the fax received by the recipient will not be split into two documents. ❏ Fax Header Select the header for the recipient. To use this feature, you should register multiple headers in advance. ❏ Additional Information Select the information you want to add. You can select one from Your Phone Number, Destination List, and None. Notify Send Result: Sends a notification after you send a fax. Transmission Report: Prints a transmission report after you send the fax. Print on Error prints a report only when an error occurs. When Attach Fax image to report has been set in Settings > General Settings > Fax Settings > Report Settings, faxes with errors are also printed with the report. Backup: Saves a backup of the sent fax that is scanned and saved to the printer's memory automatically. The backup feature is available when: ❏ Sending a fax in monochrome ❏ Sending a fax using the Send Fax Later feature ❏ Sending a fax using the Batch Send feature ❏ Sending a fax using the Store Fax Data feature Backup Destination: Select the backup destination. File Name: Specify the name of the document to be saved in the Stored Documents box and the Polling Send/Board box. Menu Select the menus on the control panel as described below. 361