Epson SP7700VM User Manual - Page 46

Epson Stylus Pro 7700/7710/9700/9710 User's Guide Paper Handling G Tape the leading edge of the roll paper to the take-up reel core in three places. Winding paper backward A Turn on the printer, and then pull out the roll paper. See step 3 to 6 of the following section. "Winding paper forward" on page 45 B Pull the bottom of the roll paper around the back of the reel core as shown below. Then tape the leading edge of the paper to the reel core in three places. H Press the button to feed the paper forward and create a loop of slack. I Set the Manual switch to Forward and hold it for a while to take up the roll paper for three or more revolutions of the take-up paper core. After taking up the paper, ensure that there is adequate slack between the roll paper and the take-up reel core. C Press the button to feed the paper forward and create a loop of slack. D Set the Manual switch to Backward and hold it for a while to take up the roll paper for three or more revolutions of the take-up paper core. After taking up the paper, ensure that there is adequate slack between the roll paper and the take-up reel core. Note: Place the Tensioner in the slack of the center of the roll paper. See the following section for the paper which uses the tensioner. See "Paper Information" on page 166 46