Epson SP7700VM User Manual - Page 12
Lights, The Control Panel
View all Epson SP7700VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Epson Stylus Pro 7700/7710/9700/9710 User's Guide The Control Panel 7. Menu button ( ) ❏ Enters the Menu mode when pressed in the READY state. See "Menu Mode" on page 15 ❏ Enters the PRINTER STATUS menu if pressed during printing. See "PRINTER STATUS " on page 23 ❏ When pressed in the Menu mode, a desired menu can be selected. 8. OK button ( ) ❏ Sets the selected parameter in the selected item in the Menu mode. Executes the item if the selected item is for execution only. ❏ The printer ejects the cut sheet by pressing this button after printing. ❏ Press this button during ink drying or color chart drying, the printer stops the operation. ❏ When you press this button while there is no paper in the printer, you can see the paper feeding procedures on the LCD panel. 9. Paper Cut button ( ) Cut the roll paper by the built-in cutter. 10. Paper Secure button ( ) ❏ This button locks or unlocks the paper presser. When you set the paper, press the button to unlock the paper presser first, and then set the paper. Press the button again so the printer starts feeding the paper and then goes to the READY state. ❏ When you press this button while REMAINING PAPER SETUP is ON, a barcode is printed on the roll paper edge and the paper presser is released. Lights 1 Power light On Flashing Off 2 Paper Check On light Flashing Off 3 Ink Check On light Flashing Off 4 Pause light On Off 5 Paper On Secure light Off The printer is on. The printer is receiving the data. The printer is in process of turning off. The printer is off. No paper is loaded in the paper source. The paper setting is not correct. Paper is jammed. Paper is not loaded straight. The printer is ready to print data. The installed ink cartridge is expended. The ink cartridge is not installed. The wrong ink cartridge is installed. The installed ink cartridge is nearly expended. The printer is ready for print data. The printer is in the Menu mode or pause mode. The printer has an error. The printer is ready to print data. The paper presser is released. The printer is ready to print data. 12