Epson ET-15000 Users Guide - Page 67

Network Environment Messages Message Solution The Wi-Fi environment needs to be improved. Turn the wireless router off and then turn it on. If the connection does not improve, see the documentation for the wireless router. Move your product closer to your router or access point, and remove any obstacles between them. Then turn off your router or access point, wait about 10 seconds, and turn it back on again. If you still cannot connect to your product, check the documentation that came with your router or access point for solutions. *No more devices can be connected. You can connect up to 8 computers or other devices to Disconnect one of the connected devices if your product using a Wi-Fi Direct (Simple AP) connection. you want to add another one. If you want to add another device, disconnect an existing connected device first. The same SSID as Wi-Fi Direct exists in the environment. Change the Wi-Fi Direct SSID if you cannot connect a smart device to the printer. Change the Wi-Fi Direct SSID. Parent topic: Printing a Network Connection Report Changing or Updating Network Connections See these sections to change or update how your product connects to a network. Accessing the Web Config Utility Changing a USB Connection to a Wi-Fi Connection Changing a Wi-Fi Connection to a Wired Network Connection Connecting to a New Wi-Fi Router Disabling Wi-Fi Features Parent topic: Wi-Fi or Wired Networking Accessing the Web Config Utility You can select your product's network settings and confirm its operating status using a web browser. You do this by accessing your product's built-in Web Config utility from a computer or other device that is connected to the same network as your product. 1. Print a network status sheet. 2. Locate the IP address for your product that is listed on the network status sheet. 67