Epson ET-15000 Users Guide - Page 187
Proceed, Settings
View all Epson ET-15000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
You see a screen like this: 3. Make sure a phone line is connected and select Proceed. 4. Use the displayed keyboard to enter the sender name for your fax source, such as your name or a business name. You can enter up to 40 characters. Select OK when finished. 5. Use the numeric keypad to enter your fax number, up to 20 characters. Select OK when finished. Note: The name and phone number in the fax header identifies the source of the faxes you send. 6. On the Distinctive Ring Setting screen, do one of the following: • If you have subscribed to a distinctive ring service from your telephone company, select Settings. Select the ring pattern to be used for incoming faxes or select All. If you selected All, go to the next step. If you selected another ring pattern, go to step 9. • If you do not have a distinctive ring service, select Skip and go to step 9. Note: Distinctive ring services allows you to have several phone numbers on one phone line. Each number is assigned a different ring pattern. You can use one number for voice calls and another for fax calls. Select the ring pattern assigned to fax calls in the Distinctive Ring Setting. If you select a ring pattern other than All, Receive Mode is automatically set to Auto. 7. On the Receive Mode Setting screen, do one of the following: • If you have connected an external telephone or answering machine to the product, select Yes and go to the next step. 187