Epson ET-15000 Users Guide - Page 194

Setting ECM Options On Off Dial Tone Detection On Off Line Type Header Receive Mode Distinctive Ring PSTN PBX Fax Header Your Phone Number Manual Auto All Single Double Triple Double&Triple Description Turns on Error Correction Mode (ECM) to automatically correct errors in sent or received fax data Turns off Error Correction Mode (ECM); color faxes cannot be sent or received Automatically dials the number you enter for faxing when the product detects a dial tone Turns off automatic dial tone detection, which may be necessary if the product is connected to a PBX (Private Branch Exchange) or a TA (Terminal Adapter). However, turning this setting off may cause the product to drop the first digit of a fax number. Selects a standard phone line (Public Switched Telephone Network) Selects Private Branch Exchange, the type of phone line used in office environments where an access code such as 9 must be used to call an outside line Select to enter the header information and your phone number for inclusion on outgoing faxes Lets you confirm whether an incoming fax should be printed; a telephone must be connected to the product Automatically receives and prints faxes If you are using a Distinctive Ring Service on your phone line, your telephone company can assign two or more phone numbers to the same line and assign different ring patterns to each. If you use this service, select the number of rings for your fax number so your product can receive faxes on the correct number of rings. Select All for phones lines that do not use this service. 194