Epson ET-15000 Users Guide - Page 188

• If you did not connect an external telephone or answering machine, select No and go to step 9. (Receive Mode is automatically set to Auto; otherwise you cannot receive faxes.) 8. On the next Receive Mode Setting screen, select Yes to receive faxes automatically or select No to receive faxes manually. Note: If you connect an external answering machine and select to receive faxes automatically, make sure the Rings to Answer setting is correct. If you select to receive faxes manually, you need to answer every call and use the product's control panel or your phone to receive faxes. 9. On the Proceed screen, confirm the displayed settings and select Proceed, or press the back arrow to change the settings. 10. On the Run Check Fax Connection screen, select Start Checking and follow the on-screen instructions to check the fax connection and print a report of the check result. If there are any errors reported, try the solutions on the report and run the check again. 11. If the Select Line Type screen appears, select the correct line type. Note: If you are connecting the product to a standard phone line, select PSTN and then select Do Not Detect on the Confirmation screen that appears. However, selecting this setting may cause the product to drop the first digit of a fax number and send the fax to the wrong number. Parent topic: Setting Up Basic Fax Features Selecting the Line Type If you connect the product to a PBX phone system or terminal adapter, you must change the product's line type. PBX (Private Branch Exchange) is used in office environments where an external access code such as "9" must be dialed to call an outside line. The default Line Type setting is PSTN (Public Switched Telephone Network), which is a standard home phone line. 1. Press the home button, if necessary. 2. Select Settings > General Settings > Fax Settings > Basic Settings > Line Type > PBX. 188