Epson C117001-N Service Manual - Page 117

Nomuwnukwc, Removing the Timing Belt Holder, Removing the CR Motor - dfx 5000t

Get Epson C117001-N - DFX 5000+ B/W Dot-matrix Printer PDF manuals and user guides
UPC - 010343816480
View all Epson C117001-N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 117 highlights

DFX-5000t Service Manual Disassembly and Assambly 3.2.7.17 Removing the CR Motor 1. Remove the printhead. (Refer to Section 3.2.1) 2. Remove the printer mechanism. (Refer to Section 3.2.6) 3. Remove the CP (PS) (M3 x 6) screw securing the timing belt holder and timing belt. Figure 3-54. Removing the Timing Belt Holder 4. Disconn(W the CR motor cable from the white, 2-pin connector on the connector junction board assembly and unhook the CR motor cables at the base frame of the printer mechanism. 5. Remove the 3 CBS (SP) (M4 x 10) screws securing the CR motor to the right side frame and remove the motor. CBS c . -.. '' Figure 3-55. Removing the CR Motor Nomuwnukwq c@~ g :? ~ ,1 When you install the CR motor, perform the cam"age timing belt tension adjustment, as described in Section 4.1.2. When you install the printhead, perform the platen gap motor value (platm gap) adjus~t, as described in Section 4.1.7. 3-41 Rev. A

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
DFX-5000t
Service Manual
Disassembly and
Assambly
3.2.7.17 Removing the CR Motor
1.
Remove the
printhead.
(Refer to Section 3.2.1)
2. Remove the printer mechanism. (Refer to Section 3.2.6)
3. Remove the CP
(PS)
(M3
x 6) screw securing the timing belt holder and timing belt.
Figure 3-54. Removing the Timing Belt Holder
4.
Disconn(W
the CR motor cable from the white, 2-pin connector on the connector junction
board assembly and unhook the CR motor cables at the base frame of the printer mechanism.
5. Remove the 3 CBS
(SP)
(M4
x 10) screws securing the CR motor to the right side frame and
remove the motor.
CBS
c
‘
.
-..
’
Figure 3-55. Removing the CR Motor
Nomuwnukwc
@~
g
:?
~
,1
When you install the CR motor, perform the
cam”age
timing belt tension adjustment, as
described
in Section 4.1.2.
When you install the
printhead,
perform the platen gap motor value
(platm
gap)
adjus~t,
as
described in Section 4.1.7.
Rev.
A
3-41