Dell Latitude 7280 Owners Manual - Page 28
Disassembly and reassembly, Un route the eDP cable from the routing channel [5].
View all Dell Latitude 7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
a. Un route the WLAN and WWAN cables from the routing channels [1]. b. Remove the M2.0 x 5.0 screws that secures the eDP bracket [2]. c. Lift the eDP bracket from the eDP cable [3]. d. Lift the eDP cable to disconnect it from the connector on the system board [4]. e. Un route the eDP cable from the routing channel [5]. 4. To remove the display assembly: a. Open the display of the computer and lay it on a flat surface at 180 degree angle b. Remove the M2.5 x 4.0 screws that secure the display hinge to the display assembly [1]. c. Lift the display assembly from the computer. 28 Disassembly and reassembly
a.
Un route the WLAN and WWAN cables from the routing channels [1].
b.
Remove the M2.0 x 5.0 screws that secures the eDP bracket [2].
c.
Lift the eDP bracket from the eDP cable [3].
d.
Lift the eDP cable to disconnect it from the connector on the system board [4].
e.
Un route the eDP cable from the routing channel [5].
4.
To remove the display assembly:
a.
Open the display of the computer and lay it on a flat surface at 180 degree angle
b.
Remove the M2.5 x 4.0 screws that secure the display hinge to the display assembly [1].
c.
Lift the display assembly from the computer.
28
Disassembly and reassembly