Dell Latitude 7280 Owners Manual - Page 20
Installing memory module, Heat sink, Removing heat sink assembly
View all Dell Latitude 7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installing memory module 1. Insert the memory module into the connector until snaps in. 2. Install the : a. battery b. base cover 3. Follow the procedures in After working inside your computer. Heat sink Removing heat sink assembly Heat sink assembly comprises of heat sink and the system fan. 1. Follow the procedure in Before working inside your computer. 2. Remove the : a. base cover b. battery 3. To remove the heat sink assembly: NOTE: To identify the number of screws, see screw list. a. Disconnect the fan cable from the system board [1]. NOTE: After removing the heat sink assembly, ensure to disconnect the fan cable. b. Remove the M2.0 x 5.0 screws that secure the heat sink and the M2.0 x 3.0 screws that secure the fan to the system board [2]. 20 Disassembly and reassembly