Dell Latitude 7280 Owners Manual - Page 15
Ensure to un-route the speaker cable from the routing clips.
View all Dell Latitude 7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3. To release the speaker module: a. Push to disconnect the speaker cable from the connector on the system board [1]. NOTE: Ensure to unroute the speaker cable from the routing clip. NOTE: Use a plastic scribe to release the cable from the connector. Do not pull the cable as it may result in breakage. b. Un-route the speaker cable from the routing clips [2]. c. Remove the tape that secures the speaker cables to the touchpad board [3]. 4. To remove the speaker module: a. Remove the M2.0x3.0 screws (4) that secure the speaker module to the computer [1]. b. Remove the M2.0x3.0 screws that secure the speaker module to the computer [1]. NOTE: Refer the speaker screw list c. Lift the speaker module from the computer [2]. NOTE: Ensure to un-route the speaker cable from the routing clips. Disassembly and reassembly 15