Dell Inspiron 5391 Service Manual - Page 36
Steps, Open the display hinges at an angle of 90 degrees.
View all Dell Inspiron 5391 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Steps 1. Remove the screw (M2.5x3.5) that secures the display-cable bracket to the system board. 2. Lift the display-cable bracket off the system board. 3. Using the pull tab, disconnect the display cable from the system board. 4. Remove the two screws (M2.5x3.5) that secure the left display hinge to the I/O board and palm-rest and keyboard assembly. 5. Remove the screw (M2x4) that secures the right display hinge to the system board. 6. Open the display hinges at an angle of 90 degrees. 7. Remove the palm-rest and keyboard assembly off the display assembly. 36 Removing and installing components
Steps
1.
Remove the screw (M2.5x3.5) that secures the display-cable bracket to the system board.
2.
Lift the display-cable bracket off the system board.
3.
Using the pull tab, disconnect the display cable from the system board.
4.
Remove the two screws (M2.5x3.5) that secure the left display hinge to the I/O board and palm-rest and keyboard assembly.
5.
Remove the screw (M2x4) that secures the right display hinge to the system board.
6.
Open the display hinges at an angle of 90 degrees.
7.
Remove the palm-rest and keyboard assembly off the display assembly.
36
Removing and installing components