Dell Inspiron 5391 Service Manual - Page 18
Removing the M.2 2230 solid-state drive
View all Dell Inspiron 5391 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Steps 1. Align the notch on the solid-state drive with the tab on the solid-state drive slot and slide the solid-state drive into the solid-state drive slot on the system board. 2. Replace the screw (M2x2.5) that secures the solid-state drive to the system board. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Removing the M.2 2230 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. About this task The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure. 18 Removing and installing components
Steps
1.
Align the notch on the solid-state drive with the tab on the solid-state drive slot and slide the solid-state drive into the solid-state drive
slot on the system board.
2.
Replace the screw (M2x2.5) that secures the solid-state drive to the system board.
Next steps
1.
Install the
battery
.
2.
Install the
base cover
.
3.
Follow the procedure in
After working inside your computer
.
Removing the M.2 2230 solid-state drive
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
battery
.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
18
Removing and installing components