Dell Inspiron 5391 Service Manual - Page 22
Fan, Removing the fan
View all Dell Inspiron 5391 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Steps 1. Align and place the screw holes on the heat sink with the screw holes on the system board. 2. In sequential order (as indicated on the heat sink), tighten the seven captive screws that secure the heat sink to the system board. 3. Adhere the mylar tape that secures the heat sink to the system board. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Fan Removing the fan Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. About this task The following image indicates the location of fan and provides a visual representation of the removal procedure. 22 Removing and installing components
Steps
1.
Align and place the screw holes on the heat sink with the screw holes on the system board.
2.
In sequential order (as indicated on the heat sink), tighten the seven captive screws that secure the heat sink to the system board.
3.
Adhere the mylar tape that secures the heat sink to the system board.
Next steps
1.
Install the
battery
.
2.
Install the
base cover
.
3.
Follow the procedure in
After working inside your computer
.
Fan
Removing the fan
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
battery
.
About this task
The following image indicates the location of fan and provides a visual representation of the removal procedure.
22
Removing and installing components