Dell Inspiron 5391 Service Manual - Page 34
Display assembly, Removing the display assembly
View all Dell Inspiron 5391 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Steps 1. Connect the power-adapter port cable to the system board. 2. Replace the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly. 3. Align and place the display-cable bracket on the system board. 4. Replace the screw (M2.5x3.5) that secure the display-cable bracket to the system board. 5. Using the alignment posts, close the display hinges. 6. Replace the screw (M2x4) that secure the right display hinge to the system board. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Display assembly Removing the display assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. About this task The following image indicates the location of display assembly and provides a visual representation of the removal procedure. 34 Removing and installing components